H2 Specific sensor/transmitter

H2 Specific sensor/transmitter
Производитель: RKI Instruments
Модель: H2_Specific
Запросить цену
  • Explosion proof housing and sensor design
  • H2 specific solid state sensor for 0 - 2000 ppm
  • H2 specific catalytic sensor for 0 - 100%LEL
  • Molecular sieve filter built in; highly specific to H2
  • Eliminates false alarms from IPA and other gases
  • 4-20 mA transmitter, 24VDC
  • Semiconductor
  • Power Plants
  • Fuel Cell Industry
  • R & D applications
  • Gas plants

RKI offers unique proprietary sensor technologies for hydrogen specific detection in either the % LEL or PPM ranges. By utilizing a proprietary molecular sieve coating that is built into both our catalytic or solid state sensors, false alarms from typical hydrocarbon interfering gases are essentially eliminated.

For the LEL range, a special catalytic sensor is coated with a molecular sieve that eliminates the response to common background gases like IPA, methane, gasoline, etc. while providing a detection range of 0 - 100% LEL for hydrogen.

The hydrogen PPM sensor can reliably detect leaks 20 times smaller than a standard catalytic sensor. This solid state sensor has a molecular sieve coating on the sensing element, which filters out interference from other gases and provides a 0 - 2,000 PPM range. Both the LEL and PPM range sensors are available with 24 VDC transmitters with linear 4-20 mA outputs.

Part # H2 Specific LEL 65-2450RK H2 Specific ppm 65-2440RK
Detection Range 0 - 100% LEL 0 - 2000 ppm
Min Operating Voltage 11 VDC
Max Operating Voltage 30 VDC
Max Current Draw 200 mA (power wires)
25 mA (signal wires) 3 wires
100 mA (power wires)
25 mA (signal wires) 3 wires
Signal Output 4 mA at 0% LEL 20 mA at 100% LEL Linear Output 4 mA @ 0 ppm 20 mA @ 2000 ppm Linear Output
Response Time 20 Seconds to 90% concentration 20 Seconds to 90% concentration
Operating Environment
Location Indoor or outdoor. Explosion proof for Class I, Div. 1, Groups B, C, and D.
Temperature -40 to 180° F 15 to 110° F
Humidity 5-95% RH non-condensing
Housing Enclosure: Aluminum Explosion Proof Sensor: Stainless steel and aluminum
Type Catalytic combustion with molecular sieve Metal oxide semiconductor with molecular sieve
Life Expectancy Over 3 years typical Over 5 years typical
Sensor Current Factory set and sealed
Zero Sets transmitter output to 4 mA with 0% LEL output from combustible sensor Sets transmitter output to 4 mA with 0 ppm output from sensor
Span Sets transmitter output to 20 mA with 100% LEL output from combustible sensor Sets transmitter output to 20 mA with 2000 ppm Hydrogen output from sensor
Tools Needed Calibration kit, Screwdriver, and voltmeter used to make adjustments.
Calibration Frequency 6 Months 12 Months
Warranty One year on electronics and sensors.